====== Accessing the AI ======

The AI is held in a sub-folder of the main **interface** folder of the CumulusMX Installation.

Accessing it depends on whether you use the computer that hsost CumulusMX or from a nother computer on your local network.  It **cannot** be accessed from a computer outside your local network unless you use some third party sofware such as VNC or rPi Connect.
<WRAP group>
<WRAP half column>
==== Using the machine that hosts CumulusMX ====
If you use <wrap box border green>**localhost:8998/**</wrap> to access the default interface \\ 
then you should be able to use <wrap box border yellow>**localhost:8998/ai2/**</wrap>\\ 
You might need to use: <wrap box border teal>**localhost:8998/ai2/index.html**</wrap>

</WRAP>

<WRAP half column>
==== Using a machine on your local network ====
If you use <wrap box border green>**<ip_address>:8998/**</wrap> to access the default interface\\ 
then you should be able to use <wrap box border yellow>**<ip_address>:8998/ai2/**</wrap> or <wrap box border teal>**<ip_address>:8998/ai2/index.html**</wrap>
</WRAP>
</WRAP>

<WRAP center round tip 80%>
**Note**: If you have used an alternative **port** number then this will obviously need to be used instead of the default port //8998// above.
</WRAP>